The electric contact material of Ag/SnO2 composite was achieved by reactive synthesis method. The compositions and microstructure of Ag/SnO2 composite were analyzed and characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, and high-resolution electron microscopy （HRTEM）. The struc- tural feature was typical of the particle reinforced composites. The HRTEM images revealed that the observed Ag/SnO2 interface was absence of the precipitated phase and the lattice contrast across the interface was clear and sharp. The average particle size of SnO2 in composite was near 50 nm and it was well dispersed in spherical shape. The thermodynamic mechanism of reactive synthesis method was also discussed. The electronic density distribution analysis of the interface showed the charges of Ag atoms transmitted to 0 atoms and the conductivity of the material was also affected. No extra compounds expected such as AgxOy formed at interface. The distribution of electrons was of inequality near the interface which explained why the mechanical property of the metal/ceramic materials was improved but the machining property declined.
This paper presents the general mathematical model on gasar eutectic growth in directional solidification. Using multiple scale expansion and matching method, we obtain the global steady solution of gasar eutectic growth as the Peclet number ε≤1, where ε is defined as the ratio of half an inter-pore spacing and solutal diffusion length. We also give the interfacial shape and predict the porosity of gasar eutectic growth. Results show that porosity is mainly dependent on gas pressure above the metal melt, but independent of pulling velocity. Our predicted results are in agreement with experimental data.
