A design method based on tip to tail streamline tracing and osculating inward cone methods is discussed for designing the integrated Osculating Inward Cone Waverider Inlet（OICWI）. A practical geometrical constrained experimental model of OICWI is designed based on the validated design method. It has a total contraction ratio of 4.61 and inner contraction ratio is 2.0. Wind-tunnel tests have been conducted for the OICWI model at free stream Mach number（Ma） of 4.0, 3.5 and 3.0 respectively. The experimental results show that the OICWI has high flow capture ratio and compression abilities. It can self-start at Ma= 3.5 and 4.0 and its flow capture ratio is 0.73 at Ma= 4.0, and Angle of Attack（AOA） 0°. The research results show that the OICWI has advantages of inward cone waverider and streamline tracing inlet. Present OICWI is a novel approach for waverider inlet integration studies and it will promote the use of waverider inlet integration configuration in the studies of airbreathing hypersonic vehicles.
The paper evaluates the evolvement of coherent structures and penetration height of gaseous transverse jet penetration into a supersonic turbulent flow.The high spatiotemporal resolution coherent structures of the jet plume are obtained by utilizing the nanoparticle-based planar laser scattering technique(NPLS).The evolving pattern of the coherent structures generated on the upwind surface of the transverse jet is analyzed based on the NPLS images.The shedding eddies from the jet near-field have lower convection velocity along freestream direction,while vortex growth rate is apparently higher than the far-field.Farther downstream,the large-scale eddies have less deformation and translate at velocities near the freestream velocity.Thus the near-field determines the scale of eddies in the far-field and affects the whole mixing process.The effect of injection stagnation pressure on the coherent structures is discussed and a modified penetration correlation is proposed based on an edge approximation definition and least square method with various injection pressures.
SUN MingBoZHANG ShunPingZHAO YanHuiZHAO YuXinLIANG JianHan
