The microstructures and mechanical properties of Mg-6Zn-1Mn-4Sn and Mg-6Zn-1Mn-4Sn-0.5Y alloys under extrusion and T6 aging conditions were investigated by optical microscopy（OM）, X-ray diffraction（XRD）, scanning electron microscopy（SEM） and tensile test. The results show that Y element refines the grains and improves the comprehensive mechanical properties of ZMT614-0.5Y both in as-extruded and T6 states. The phase compositions of Mg-6Zn-1Mn-4Sn-0.5Y are α-Mg, Mg Zn2, Mn, Mg2 Sn and Mg Sn Y phases. After T6 treatment, the ultimate tensile strength（UTS） and yield strength（YS） increase while the elongation decreases severely. For both of these alloys, the theoretical results combined with the experimental values demonstrate that the grain boundary strengthening and solid solution strengthening play an important role in enhancing the YS in the as-extruded state, while the precipitation strengthening is the key factor for the enhancement of YS in the T6 state.
Optical microscope(OM),scanning electron microscope(SEM),transmission electron microscope(TEM)and tensile machine were used to characterize the microstructures and mechanical properties of as-forged and aged Mg-9.5Gd-3.8Y-0.6Zr alloys.The results show that a novel kind of dislocation arrays,comprising parallel arranged dislocations,were obtained in the forged alloy.The arrays tend to extend parallel and are heterogeneously distributed with adjacent distances varying from 0.3μm to 1.4μm.After aging the alloy at 265°C,a large number of preferential-oriented phases were precipitated on the dislocation arrays,forming a structure of"precipitation chains"(PCs),which results in simultaneous increments of strength and ductility.
Chao YouChurning LiuYingchun WanBei TangBizheng WangYonghao GaoXiuzhu Han
