This paper studies the dynamic conducting crack propagation in piezoelectric solids under suddenly in-plane shear loading. Based on the integral transform methods and the Wiener-Hopf technique, the resulting mixed boundary value problem is solved. The analytical solutions of the dynamic stress intensity factor and dynamic electric displacement intensity factor for the Mode II case are derived. Furthermore, the numerical results are presented to illustrate the characteristics of the dynamic crack propagation. It is shown that the universal functions for the dynamic stress and electric displacement intensity factors vanish if the crack propagation speed equals the generalized Rayleigh speed. The results indicate that the defined electro-mechanical coupling coefficient is of great importance to the universal functions and stress intensity factor history.
The dispersion behavior of the shear horizontal （SH） waves in the coupled structure consisting of a piezomagnetic substrate and an orthorhombic piezoelectric layer is investigated with different cut orientations. The surface of the piezoelectric layer is mechanically free, electrically shorted, or open, while the surface of the piezomagnetic substrate is mechanically free, magnetically open, or shorted. The dispersion relations are derived for four electromagnetic boundary conditions. The dispersion characteristics are graphically illustrated for the layered structure with the PMN-PT layer perfectly bonded on the CoFe2O4 substrate. The effects of the PMN-PT cut orientations, the electromagnetic boundary conditions, and the thickness ratio of the layer to the substrate on the dispersion behavior are analyzed and discussed in detail. The results show that, （i） the effect of the cut orientation on the dispersion curves is very obvious, （ii） the electrical boundary conditions of the PMN-PT layer dominate the propagation feature of the SH waves, and （iii） the thickness ratio has a significant effect on the phase velocity when the wave number is small. The results of the present paper can provide valuable theoretical references to the applications of piezoelectric/piezomagnectic structure in acoustic wave devices.
Based on effective field method,the dynamic effective elastic modulus of polymer matrix composites embedded with dense piezoelectric nano-fibers is obtained,and the interacting effect of piezoelectric surfaces/interfaces around the nano-fibers is considered.The multiple scattering effects of harmonic anti-plane shear waves between the piezoelectric nano-fibers with surface/interface are averaged by effective field method.To analyze the interacting results among the random nano-fibers,the problem of two typical piezoelectric nano-fibers is introduced by employing the addition theorem of Bessel functions.Through numerical calculations,the influence of the distance between the randomly distributed piezoelectric nano-fibers under different surface/interface parameters is analyzed.The effect of piezoelectric property of surface/interface on the effective shear modulus under different volume fractions is also examined.Comparison with the simplified cases is given to validate this dynamic electro-elastic model.
We study the electrically forced thickness-shear and thickness-twist vibrations of stepped thickness piezoelectric plate mesa resonators made of polarized ceramics or 6-ram class crystals. A theoretical analysis based on the theory of piezoelectricity is performed, and an analytical solution is obtained using the trigonometric series. The electrical admittance, resonant frequencies, and mode shapes are calculated, and strong energy trapping of the modes is observed. Their dependence on the geometric parameters of the resonator is also examined.
The propagation of shear-horizontal(SH)waves in the periodic layered nanocomposite is investigated by using both the nonlocal integral model and the nonlocal differential model with the interface effect.Based on the transfer matrix method and the Bloch theory,the band structures for SH waves with both vertical and oblique incidences to the structure are obtained.It is found that by choosing appropriate interface parameters,the dispersion curves predicted by the nonlocal differential model with the interface effect can be tuned to be the same as those based on the nonlocal integral model.Thus,by propagating the SH waves vertically and obliquely to the periodic layered nanostructure,we could invert,respectively,the interface mass density and the interface shear modulus,by matching the dispersion curves.Examples are further shown on how to determine the interface mass density and the interface shear modulus in theory.
