The present paper reports the first investigation on a turbulent jet issuing from a diamond orifice（hereafter termed a ＂diamond jet＂） with an aspect ratio of 1.7.Velocity measurements were conducted in the transitional region,and the exit Reynolds number of the jet was 50000.For comparison,a round jet with identical normalized boundary conditions was also measured.It is shown that the diamond jet decays and spreads faster than the round jet does over the measured flow region.The axis-switching phenomenon is observed in the diamond jet.Although both jets display primary coherent structures in the near field,these structures are found to break down more rapidly in the diamond jet,due to the higher three-dimensionality of the flow.Moreover,the streamwise components of the Reynolds normal stress and all the shear stresses reach their maxima around the location of the maximal mean shear while the maxima of the lateral components of the Reynolds normal stresses occur around the centreline of the jet.
The effect of a cross-sectional exit plane on the downstream mixing characteristics of a circular turbulent jet is in- vestigated using large eddy simulation （LES）. The turbulent jet is issued from an orifice-type nozzle at an exit Reynolds number of 5 ×104. Both instantaneous and statistical velocity fields of the jet are provided. Results show that the rates of the mean velocity decay and jet spread are both higher in the case with the exit plate than without it. The existence of the plate is found to increase the downstream entrainment rate by about 10% on average over the axial range of 8-30de （exit diameter）. Also, the presence of the plate enables the formation of vortex rings to occur further downstream by 0.5-1 .Ode. A physical insight into the near-field jet is provided to explain the importance of the boundary conditions in the evolution of a turbulent jet. In addition, a method of using the decay of the centreline velocity and the half-width of the jet to calculate the entrainment rate is proposed.
