双提梁机组协调控制系统利用对称布置的双频载波相位RTK-GPS(Real-Time Kinematic difference Global Position System)接收机完成对提梁机位置、航向位姿信息的测量,通过卡尔曼滤波与里程计融合,消除坐标定位信息的波动,提高位姿测定的精度;单机采用基于CAN(Controller Area Network)总线的网络控制系统,机组间数据传输采用无线网络,构成混合网络控制系统;采用基于双闭环的同步控制策略实现对两提梁机的同步协调控制.实际应用结果表明,两提梁机间相对位置偏差不超过0.1 m,相对航向角度偏差不超过0.1°.
Aiming at scheduling problems of networked control system (NCS) used to fulfill motion synthesis and cooperation control of the distributed multi-mechatronic systems, the differences of network scheduling and task scheduling are compared, and the mathematic description of task scheduling is presented. A performance index function of task scheduling of NCS according to task balance and traffic load matching principles is defined. According to this index, a static scheduling method is designed and implemented to controlling task set simulation of the DCY100 transportation vehicle. The simulation results are applied successfully to practical engineering in this case so as to validate the effectiveness of the proposed performance index and scheduling algorithm.