In order to control the vehicle body position precisely,1/4 nonlinear mathematical model of hydro-pneumatic suspension is established,and the influence of the frictional force in a hydraulic cylinder is analyzed.The friction characteristics are described based on the LuGre model when the piston of a hydraulic actuator is operated at a low speed.Due to the fact parameters of the friction model are effected by the system condition,an adaptive friction compensation（AFC）controller is designed through the Backstepping method,and a dual-observer has been implemented to estimate the friction state.The global asymptotic convergence of a closed-loop system is proven by the Lyapunov theorem.The simulation results show that the positional accuracy of the adaptive friction compensation yiedls a significant improvement in the vehicle height adjustment as compared to the PID control,demonstrating the effectiveness of the adaptive fiction compensation method in the vehicle height adjustable system of the hydro-pneumatic suspension.
Based on previous achievements,a dynamic pressure-sinkage equation for saturated clay is established.First,aquasi-static penetration rate is selected,and the ratio of the dynamic penetration rate to the quasi-static rate is used to characterize the degree of dynamic effect,then theβth power of the ratio is used to quantify the dynamic effect of sinkage.The dynamic effect exponentβis obtained using penetration tests with different penetration rates.Then,a dynamic motion resistance equation for a tracked vehicle is established based on the dynamic pressure-sinkage equation.The equation incorporates both penetration and bulldozing resistance.Finally,a series of simulation experiments with varying travel speeds and slip rates is carried out.The results show that an increase in the speed leads to stronger terrain stiffness,resulting in a decrease in sinkage and motion resistance.However,the enhancement effect becomes weaker with an increase in the travel speed.
