Based on the principle of 3D particle flow code,a numerical landslide run-out model is presented to simulate the failure process of the Zhenggang landslide(in southwestern China) under the effect of water after a rainfall.The relationship between the micro-mechanical parameters and the macro-shear strength of the grain material is determined through numerical calibrations.Then the rainfall effect is considered in numerical simulations and rain-induced sliding processes are performed,which help us to discuss the mechanism of deformation and failure of this landslide together with field observations.It shows the Zhenggang landslide would most likely be activated in Zone I and would gain momentum in Zone II.In order to prevent the potential disaster,a tailing dam is advised to be designed about 175 m downstream from the current landslide boundary of Zone II.Verified by field observations,the presented landslide model can reflect the failure mechanism after rainfall.It can also provide a method to predict the potential disaster and draft disaster prevention measures.
For deposit body medium, the internal structural properties may be the controlling factors for the strength of the material and the mechanical response. Based on the results of soil-rock meso-statistics using digital imaging, a simulated annealing algorithm is adopted to expand the meso-structural features of deposit bodies in 3D. The construction of the 3D meso-structure of a deposit body is achieved, and then the particle flow analysis program PFC3 D is used to simulate the mechanical properties of the deposit body. It is shown that with a combination of the simulated annealing algorithm and the statistical feature functions, the randomness and heterogeneity of the rock distribution in the 3D inner structure of deposit body medium can be realized, and the reconstructed structural features of the deposit medium can match the features of the digital images well. The spatial utilizations and the compacting effects of the body-centered cubic, hexagonal close and face-centered packing models are high, so these structures can be applied in the simulations of the deposit structures. However, the shear features of the deposit medium vary depending on the different model constructive modes. Rocks, which are the backbone of the deposit, are the factors that determine the shear strength and deformation modulus of the deposit body. The modeling method proposed is useful for the construction of 3D meso-scope models from 2D meso-scope statistics and can be used for studying the mechanical properties of mixed media, such as deposit bodies.
