采用原子转移自由基聚合方法(A tom transfer rad ica l po lym erization,ATRP),以α-溴丙酸乙酯为引发剂,溴化亚铜和联二吡啶为催化体系,合成了端基为卤原子的单分散聚甲基丙烯酸甲酯(PMM A-X)预聚体。以此PMM A-X为大分子引发剂,在同样催化体系下,引发苯乙烯聚合,得到了分子量分布较窄的聚甲基丙烯酸甲酯-b-聚苯乙烯(PMM A-b-PS t)嵌段共聚物,并用红外光谱(IR)、核磁共振谱(1H-NM R)、凝胶渗透色谱(GPC)和透射电子显微镜(TEM)对其结构和形态进行了初步表征。结果表明,嵌段共聚物中聚甲基丙烯酸甲酯的质量百分数为28%,数均分子量(M n)为4.76×104,多分散系数(PD I)为1.49。经TEM表征,发现该嵌段聚合物具有周期性层状相分离结构,层状取向周期达到了400 nm左右,在紫外-可见波长范围内。这一特征长周期为嵌段共聚物材料用作光波导等光学器件提供了结构基础。
Using Ti powder as reagent, TiO 2 nanoneedle/nanoribbon spheres were prepared via hydrothermal method in NaOH solution. The samples were characterized by field emission scanning electron microscopy （FESEM）, transmission electron microscopy （TEM） with selected area electron diffraction （SAED）, X-ray diffraction （XRD）, and UV-visible light absorption spectrum. The results indicate that the growth orientations of the crystals are influenced by the hydrothermal temperature and NaOH concentration. The diameter of the nanoneedle spheres and nanoribbon spheres （40 50 μm） are almost the same as that of Ti powders. TiO 2 nanoneedle/nanoribbon sphere powders are anatase after heat treatment at 450 °C for 1 h. Furthermore, methyl orange was used as a target molecule to estimate the photocatalytic activity of the specimens. Under the same testing conditions, the photocatalytic activities of the products decrease in the following order： TiO 2 nanoneedle sphere, TiO 2 nanoribbon sphere and P25.
