To reduce the error in transfer alignment caused by reference information delay,a time delay estimation method is developed based on least-squares curve fitting of the angular rate integration.First,the gyro sensor measurements of the main strapdown inertial navigation system（M-SINS） and the slave strapdown inertial navigation system（S-SINS） are recorded for a few seconds and the integration of the data is calculated.Then,the possible maximum range of the delay value is defined and the points of the curve at different intervals are moved.The square of the differences between the corresponding points are calculated.Finally,the delay estimation can be acquired by the least-squares curve fitting of the M-SINS and the S-SINS.A delay compensation method by local data shifting is also presented.The simulation results demonstrate the effectiveness of delay estimation and indicate that the estimation accuracy is independent of the delay value.And the local data shifting compensation method can effectively reduce the errors of the transfer alignment caused by the reference information delay.
